Tipton Gas Get a free quote
Gas Safe registered · Tipton

Glow-worm F29 Fault Code in Tipton

Glow-worm boiler showing F29 in Tipton? It means the flame went out while the boiler was running. What causes it, what you can check, and when to call an engineer.

Same-day breakdowns Fixed prices No call-out fee
  • Gas Safe registered engineers
  • Fully insured, work guaranteed
  • Fixed prices, no call-out fee
  • Local to Tipton & Sandwell

F29 on a Glow-worm usually means the flame went out after the boiler had already lit. It started, ran for a while, then lost the flame and locked out. Glow-worm is made by the same group as Vaillant, and the codes behave in a similar way. Check your manual for your exact model.

Because the boiler lit first, the cause is often the gas supply dipping or the boiler struggling to keep the flame steady. A prepayment meter running low, a blocked condensate pipe or a worn electrode are all common.

Glow-worm combis are everywhere in Tipton, from the terraces near the canal to the newer homes off Ocker Hill. Many replaced old back boilers and sit in kitchens with the condensate pipe running out through a cold back wall.

Good to know

Common Glow-worm F29 Fault Code questions

Is F29 dangerous?

No. The boiler shut off safely when it lost the flame. Smell gas? Get everyone outside, leave switches alone and call 0800 111 999, the National Gas Emergency line. A code on the display is not a leak. A smell might be.

It comes back every few days.

A fault that keeps returning is worth fixing before the cold sets in properly. Repeated lockouts usually mean a part is on its way out.

Can I keep resetting it?

Reset once. If it locks out again, leave it off. Resetting again and again will not fix a supply or ignition fault.

How do I check who is coming?

Gas engineers carry a Gas Safe ID card. Check the back to see that boilers are on the list.

What's involved

Glow-worm F29 Fault Code in Tipton, the right way

Check the meter

On a prepayment meter, look at the credit. A meter that runs out mid-cycle cuts the gas and gives exactly this code. Topping up and resetting once often clears it.

Is the hob working?

Light the hob. If it flickers or will not stay lit either, the gas supply to the house is the problem, not the boiler.

Frosty mornings

If F29 appears on cold mornings, the condensate pipe outside may be freezing. Pour warm water, not boiling, along it and reset once.

What the engineer looks at

Gas pressure at the boiler, the electrode and its lead, the condensate trap and the flue. Most F29 repairs are a single part.

Photos worth sending

The display showing F29, the label inside the door, and whether you are on a prepayment meter. Say if it happens on heating, hot water or both.

More from Tipton Gas

Also from Tipton Gas

Get in touch

Book a Gas Safe engineer in Tipton

Homeowner or landlord, we've got Tipton covered: repairs, servicing, installs and certificates. Leave your details and a local engineer will get back to you fast.

Send a photo of the problem on WhatsApp for the quickest reply, or give us a call. You get a free, no-obligation quote, usually the same day.

WhatsApp us